PLX Kiwi 2 Bluetooth
PLX Kiwi 2 Bluetooth
Kiwi 2 Bluetooth is a plug and play automotive tool that connects to the onboard diagnostic port (OBDII / CAN). This tool communicates and retrieves information from your car's computer and wirelessly transmits to any Android, Smybian, N9, Linux, or PC. It is compatible with 1996 and later vehicles and installs in seconds. The Kiwi 2 Bluetooth can efficiently monitor a vehicle's MPG, data log engine parameters, read/reset engine trouble codes and monitor real time engine performance. Simply connect your device to the Kiwi 2 Bluetooth through a Bluetooth connection, and launch the compatible app of your choice to obtain vital information about your vehicle.
The Kiwi 2 Bluetooth includes several improvements over the first generation award winning Kiwi 1 Bluetooth. It now comes with a sleek new design and is 0.25 inches thinner. The cable length has been reduced from 6 feet to 3 feet, making for a cleaner permanent installation. It incorporates an elm327 compatible interface and it works with ISO9141, VPW, PWM, and CAN protocols.
The Kiwi 2 Bluetooth incorporates a new advanced power saving circuit, designed to shut off power to essential functions of the unit allowing the Kiwi 2 Bluetooth to be permanently installed in your vehicle without draining your vehicle's battery. After 5 minutes of inactivity, the Kiwi 2 Bluetooth automatically enters a low power sleep mode. To turn the unit back on, a simple press of the soft switch wakes the device back up.
The Kiwi 2 Bluetooth includes an 8 pin port on the back designed to be mated with the PLX iMFD Adapter. This allows you to connect high performance aftermarket sensors such as wideband air/fuel ratio, exhaust gas temperature, vacuum/boost, air intake temperature, fluid pressure and fluid temperature and view on your Android mobile device. This solution is desired for applications where vehicles do not support certain sensors and/or the car's computer does not report them. With the PLX iMFD Adapter attached, the best of both worlds of fully plug and play OBD2 / CAN data as well as high performance aftermarket sensors can be obtained.
Hardware Features
New Feature: iMFD Aftermarket Sensor Interface
New Feature: Power Saving Circuit
New Feature: Improved Antenna Performance
Features
Depending on the application, the following features may be available:
Check Engine Diagnostics
Real-time Gauges
Fuel Efficiency and MPG
Engine Sensors
Customizable Dashboard
Real-time Dyno
Data Logging
GPS Track Mapping
Skid Pad
Video Recording and Data Overlay
Kiwi Bluetooth is compatible with these apps
DashCommand by Palmer Performance
Torque by Ian Hawkins
OBDAutoDoctor Car OBD Tool by Creyosys
OBD Droidscan Pro by MockOne Performance
DragFX By Big Block Entertainment
alOBD ScanGenPro by Alexandre Beloussov
ScanXL" Professional by Palmer Performance
Product videos
Included items
Kiwi 2 Bluetooth Main Unit
User Manual
**All applications are downloaded through the Android market. Some apps may need to be purchased separately from the Kiwi Bluetooth.
OBDII Sensors
Depending on your vehicle and the application that you choose to use, sensor support will vary. However in most vehicles the following sensors are reported through the onboard diagnostic port.
RPM
Vehicle Speed
Throttle Position
Engine Load
Absolute Engine Load
Engine Timing
Air Intake Temperature
Coolant Temperature
Ambient Air Temperature
Intake Pressure (MAP)
Air Flow (MAF)
Fuel Pressure
Fuel Pressure Relative
Fuel Level
Barometric Pressure
Catalytic Converter Temperature
ECU Voltage
OBD Type
Short Term Fuel Trim (Bank 1)
Long Term Fuel Trim (Bank 1)
Short Term Fuel Trim (Bank 2)
Long Term Fuel Trim (Bank 2)
Oxygen Sensor Voltage1 (Bank 1)
Oxygen Sensor Voltage1 (Bank 2)
Oxygen Sensor Voltage2 (Bank 1)
Oxygen Sensor Voltage2 (Bank 2)
iMFD Sensors
| Sensor | Address | Units | Min | Max |
|---|---|---|---|---|
| Wideband O2 | 0 | 0 - Lambda | 0.68 | 1.36 |
| 1 - Gasoline (14.7) | 10 | 20 | ||
| 2 - Diesel (14.6) | 9.93 | 19.86 | ||
| 3 - Methanol (6.4) | 4.35 | 8.7 | ||
| 4 - Ethanol (9.0) | 6.12 | 12.24 | ||
| 5 - LPG (15.5) | 10.54 | 21.08 | ||
| 6 - CNG (17.2) | 11.7 | 23.39 | ||
| 7 - E85 (9.76) | 6.64 | 13.27 | ||
| Exhaust Gas Temp | 1 | 0 - Celsius | 0 | 1023 |
| 1 - Fahrenheit | 32 | 1873 | ||
| Fluid Temp | 2 | 0 - Celsius Water | 0 | 150 |
| 1 - Fahrenheit Water | 32 | 302 | ||
| 2 - Celsius Oil | 0 | 150 | ||
| 3 - Fahrenheit Oil | 32 | 302 | ||
| Vacuum | 3 | 0 - Vac in/Hg | 29.93 | 0 |
| 1 - Vac mm/Hg | 760 | 0 | ||
| Boost | 4 | 2 - Boost 0-30 PSI | 0 | 30 |
| 3 - Boost 0-2 kg/cm2 | 0 | 2.07 | ||
| 4 - Boost 0-15 PSI | 0 | 15 | ||
| 5 - Boost 0-1 kg/cm2 | 0 | 1.12 | ||
| 6 - Boost 0-60 PSI | 0 | 60 | ||
| 7 - Boost 0-4 kg/cm2 | 0 | 4.22 | ||
| Air Intake Temp | 5 | 0 - Celsius | 0 | 150 |
| 1 - Fahrenheit | 32 | 302 | ||
| RPM | 6 | 0 - 8k | 0 | 8000 |
| 1 - 12k | 0 | 12000 | ||
| 2 - 20k | 0 | 20000 | ||
| Speed | 7 | 0 - MPH | 0 | 160 |
| 1 - km/H | 0 | 258 | ||
| Throttle Position | 8 | 0 - Percent | 0 | 100 |
| Engine Load | 9 | 0 - Percent | 0 | 100 |
| Sensor | Address | Units | Min | Max |
|---|---|---|---|---|
| Fluid Pressure | 10 | 0 - PSI Fuel | 0 | 120 |
| 1 - kg/cm2 Fuel | 0 | 8.44 | ||
| 2 - Bar Fuel | 0 | 8.27 | ||
| 3 - PSI Oil | 0 | 120 | ||
| 4 - kg/cm2 Oil | 0 | 8.44 | ||
| 5 - Bar Oil | 0 | 8.27 | ||
| Timing | 11 | 0 - Degree | -64 | 64 |
| Manifold Absolute | 12 | 0 - kPa | 0 | 255 |
| Pressure (MAP) | 1 - inHg | 0 | 75.3 | |
| Mass Air Flow (MAF) | 13 | 0 - g/s | 0 | 655.35 |
| 1 - lb/min | 0 | 86.69 | ||
| Short Term Fuel Trim | 14 | 0 - Percent | -100 | 100 |
| Long Term Fuel Trim | 15 | 0 - Percent | -100 | 100 |
| Narrowband O2 | 16 | 0 - Percent | 0 | 100 |
| 1 - Volts | 0 | 1.275 | ||
| Fuel Level | 17 | 0 - Percent | 0 | 100 |
| Volt Meter | 18 | 0 - Volts | 0 | 20 |
| Knock | 19 | 0 - Volts | 0 | 5 |
| Duty Cycle | 20 | 0 - Positive | 0 | 100 |
| 1 - Negative | 0 | 100 | ||
| Fuel Efficiency | 21 | 0 - MPG | 0 | 100 |
| 1 - KM/L | 0.43 | 42.51 | ||
| 2 - L=100KM | ||||
| Analog Voltage | 22 | 0 - Volts | 0 | 5 |
| Speed (Hertz) | 23 | 0 - Hz | 0 | 10,230 |
Delivery
We keep as much stock as possible in the UK, however, if they are out of stock, we can bring a kit in via Air freight for an additional £35 (usual lead time via sea is about 5 weeks if the item is out of stock) If you require this service, please add this to your order in the option list. Please call in to find out on stock availability before ordering.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
