PLX DM-6 Gauge Combo
PLX DM-6 Gauge Combo
The PLX Wideband AFR (UEGO) gauge combo combines an accurate, fast response wideband AFR (Air Fuel Ratio) controller with the world's most advanced touch screen 2 1/16" gauge (52mm). It includes a Bosch LSU4.2 wideband oxygen sensor. The wideband controller (SM-AFR) works with gasoline, bio diesel, ethanol, methanol, E85, LPG, and CNG. It includes two analog outputs (wideband 0-5V, and narrowband 0-1V) for interfacing with 3rd party devices and one digital serial output for interfacing with the DM-6 gauge and other Multi Gauges. The wideband analog output is ideal for interfacing with aftermarket ECU's and data loggers. The narrowband output is ideal for stock narrowband oxygen sensor replacement where the simulated narrowband analog output is fed back into your ECU to make it operate as if the stock narrowband oxygen sensor is still installed while running the PLX wideband setup. All three outputs can be used simultaneously. Additional features include advanced soft start technology which prolongs the oxygen sensor's life and an aluminum enclosure for durability and reliability.
Features
- Plug and play controller and gauge combo
- No Calibration Required
- Soft start technology
- 2 analog outputs
- 1 digital input, 1 digital output
- Bosch LSU 4.2 Sensor
- Compatible with multiple fuels
Videos
Technical Specifications (DM-6)
- Left Capacitive Button
- 16 Green/Orange/Red LEDs
- 1.1" OLED Screen (124 x 36 pixels)
- Right Capacitive Button
- PLX Capacitive Button
Physical Dimensions: Standard 2 1/16 x 0.7" (52 X 18 mm) Display Technology: 1.10" OLED Screen (124 x 36 pixels)
LED (16 Green, Yellow, Red)Viewing Angle: 180 Degrees Polarization: None Supply Voltage: 3.3V and 8V from SM Module Power Consumption: < 1 Watt Cable Length: 6' Power, 6" Serial Operating Temp: 0 - 85 Degrees Celsius Human Interface: 3 Button Capacitive Touch Number of Sensors: 16 Maximum Daisy Chain Supported Units: US Standard, Metric
Technical Specifications (SM-AFR)
- 12V power input
- 4 Prong Analog Clip
- Termination Jumper
- Serial RX Plug (In)
- Serial TX Plug (Out)
- Sensor Input Clip
Physical Dimensions: 2 x 2.875 x 1.125" (52 x 75 x 28mm) L x W x H Technology: PLX Critical Response Technology, Fast Response PID Accuracy: < 0.1AFR (Gasoline) Wideband, < 0.2AFR (Gasoline) Narrowband Measurement Range: 10-20 AFR (Gasoline)
0.68 - 1.36 lambda (Gasoline)Analog Outputs: Wideband Linear 0-5V,
Narrowband 0-1V (Driving Current 20mA)Operating Voltage: 9V-20V Power Consumption: 20 Watts (Max), 13 Watts (Typical) Power Supply Technology: High Efficiency Switching with Soft Start Technology Operating Temperature: 0 - 85 Deg Celsius Sensor: One Bosch LSU 4.2 Enclosure: Extruded Aluminum
Included items
- SM-AFR main unit
- Bosch LSU 4.2 wideband sensor
- O2 sensor harness 10ft
- 4ft power wire with 2.1mm connector
- 4ft Analog wires and connector with 4 terminals
- 1ft Serial Cable
- Termination jumper
- User Manual
- DM-6 2 1/16" (52 mm) Gauge
- 4 Pin connector for SM-AFR connectivity
- 2 Terminals for 4 pin Connector
- *O2 Bung and Cap Sold Separately
iMFD Sensors
| Sensor | Address | Units | Min | Max |
|---|---|---|---|---|
| Wideband O2 | 0 | 0 - Lambda | 0.68 | 1.36 |
| 1 - Gasoline (14.7) | 10 | 20 | ||
| 2 - Diesel (14.6) | 9.93 | 19.86 | ||
| 3 - Methanol (6.4) | 4.35 | 8.7 | ||
| 4 - Ethanol (9.0) | 6.12 | 12.24 | ||
| 5 - LPG (15.5) | 10.54 | 21.08 | ||
| 6 - CNG (17.2) | 11.7 | 23.39 | ||
| 7 - E85 (9.76) | 6.64 | 13.27 | ||
| Exhaust Gas Temp | 1 | 0 - Celsius | 0 | 1023 |
| 1 - Fahrenheit | 32 | 1873 | ||
| Fluid Temp | 2 | 0 - Celsius Water | 0 | 150 |
| 1 - Fahrenheit Water | 32 | 302 | ||
| 2 - Celsius Oil | 0 | 150 | ||
| 3 - Fahrenheit Oil | 32 | 302 | ||
| Vacuum | 3 | 0 - Vac in/Hg | 29.93 | 0 |
| 1 - Vac mm/Hg | 760 | 0 | ||
| Boost | 4 | 2 - Boost 0-30 PSI | 0 | 30 |
| 3 - Boost 0-2 kg/cm2 | 0 | 2.07 | ||
| 4 - Boost 0-15 PSI | 0 | 15 | ||
| 5 - Boost 0-1 kg/cm2 | 0 | 1.12 | ||
| 6 - Boost 0-60 PSI | 0 | 60 | ||
| 7 - Boost 0-4 kg/cm2 | 0 | 4.22 | ||
| Air Intake Temp | 5 | 0 - Celsius | 0 | 150 |
| 1 - Fahrenheit | 32 | 302 | ||
| RPM | 6 | 0 - 8k | 0 | 8000 |
| 1 - 12k | 0 | 12000 | ||
| 2 - 20k | 0 | 20000 | ||
| Speed | 7 | 0 - MPH | 0 | 160 |
| 1 - km/H | 0 | 258 | ||
| Throttle Position | 8 | 0 - Percent | 0 | 100 |
| Engine Load | 9 | 0 - Percent | 0 | 100 |
| Sensor | Address | Units | Min | Max |
|---|---|---|---|---|
| Fluid Pressure | 10 | 0 - PSI Fuel | 0 | 120 |
| 1 - kg/cm2 Fuel | 0 | 8.44 | ||
| 2 - Bar Fuel | 0 | 8.27 | ||
| 3 - PSI Oil | 0 | 120 | ||
| 4 - kg/cm2 Oil | 0 | 8.44 | ||
| 5 - Bar Oil | 0 | 8.27 | ||
| Timing | 11 | 0 - Degree | -64 | 64 |
| Manifold Absolute | 12 | 0 - kPa | 0 | 255 |
| Pressure (MAP) | 1 - inHg | 0 | 75.3 | |
| Mass Air Flow (MAF) | 13 | 0 - g/s | 0 | 655.35 |
| 1 - lb/min | 0 | 86.69 | ||
| Short Term Fuel Trim | 14 | 0 - Percent | -100 | 100 |
| Long Term Fuel Trim | 15 | 0 - Percent | -100 | 100 |
| Narrowband O2 | 16 | 0 - Percent | 0 | 100 |
| 1 - Volts | 0 | 1.275 | ||
| Fuel Level | 17 | 0 - Percent | 0 | 100 |
| Volt Meter | 18 | 0 - Volts | 0 | 20 |
| Knock | 19 | 0 - Volts | 0 | 5 |
| Duty Cycle | 20 | 0 - Positive | 0 | 100 |
| 1 - Negative | 0 | 100 | ||
| Fuel Efficiency | 21 | 0 - MPG | 0 | 100 |
| 1 - KM/L | 0.43 | 42.51 | ||
| 2 - L=100KM | ||||
| Analog Voltage | 22 | 0 - Volts | 0 | 5 |
| Speed (Hertz) | 23 | 0 - Hz | 0 | 10,230 |
Delivery
We keep as much stock as possible in the UK, however, if they are out of stock, we can bring a kit in via Air freight for an additional £35 (usual lead time via sea is about 5 weeks if the item is out of stock) If you require this service, please add this to your order in the option list. Please call in to find out on stock availability before ordering.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
